Amazon affiliate links - we earn a commission.Affiliate disclosure

Buying guide · 12 min read · Updated 2026-11-21

Best Oscillating Multi-Tools Under $100 (2026)

Six oscillating multi-tools compared on brushless motors, OPM speed range, quick blade change, vibration, LED light and kit contents for flush cuts.

Brianna Cole, Lead Product EditorBy Brianna ColeLead Product Editor6 picks comparedSpec-sheet verified
Best Oscillating Multi-Tools Under $100

At a glance

Our top picks

Side by side

Spec comparison

PieceMotorBest forPlatformSpeed
DEWALT 20V MAX XR oscillating tool DCS356D1, brushless, quick blade change, LED, battery and chargerBest OverallDEWALT 20V MAX XR oscillating tool DCS356D1, brushless, quick blade change, LED, battery and chargerBrushless, up to 57 percent more run time than brushed per the listingRemodelling and trim workn/an/a
DEWALT 20V oscillating tool DCS356SD1 kit with wood blades, sandpaper, tool bag, battery and chargerBest Kit with AccessoriesDEWALT 20V oscillating tool DCS356SD1 kit with wood blades, sandpaper, tool bag, battery and chargerBrushless, up to 57 percent more run timeFirst multi tool buyersDEWALT 20V MAXn/a
Milwaukee 2836-20 M18 FUEL brushless oscillating multi tool, tool onlyBest Pro OptionMilwaukee 2836-20 M18 FUEL brushless oscillating multi tool, tool onlyBrushlessContractors and M18 ownersMilwaukee M18 FUELn/a
Milwaukee 2626-20 M18 orbiting multi tool, 11,000 to 18,000 OPM, 12 speeds, bare toolBest Wide Speed RangeMilwaukee 2626-20 M18 orbiting multi tool, 11,000 to 18,000 OPM, 12 speeds, bare tooln/aTough use on a budget for M18 ownersMilwaukee M1811,000 to 18,000 OPM, 12 settings
RYOBI ONE+ 18V cordless oscillating multi tool, up to 20,000 OPM, tool onlyBest Value PlatformRYOBI ONE+ 18V cordless oscillating multi tool, up to 20,000 OPM, tool onlyn/aHomeowners on the ONE+ platformRYOBI ONE+ 18VUp to 20,000 OPM variable
Hammerhead 2.2 amp corded oscillating multi tool, 20,000 OPM, flush cut blade and accessoriesBest Corded ValueHammerhead 2.2 amp corded oscillating multi tool, 20,000 OPM, flush cut blade and accessories2.2 amp cordedWorkshop and budget DIYn/aUp to 20,000 OPM variable

An oscillating multi tool vibrates a flat blade or sanding pad through a small arc at high speed, which lets it cut flush against a surface, plunge into a wall or sand in a tight corner. It is a problem solver for remodelling, trimming door jambs and removing grout.

The tool's value depends on vibration, blade change speed, accessory compatibility and whether it is corded or battery powered. We evaluated six models from the candidate pool using spec sheets, listing details and owner feedback patterns, then ranked them by fit for common jobs. Check our guide on oscillating multi tool uses for more ideas.

Before you buy

6 Criteria to Look For Before Buying an Oscillating Multi-Tool Under $100

  1. 01

    Brushless versus brushed

    A brushless motor is more efficient, runs cooler and lasts longer than a brushed one. The DEWALT and Milwaukee FUEL tools are brushless, and the Milwaukee 2626-20, RYOBI and Hammerhead are brushed in these listings. Brushless matters most for cordless tools, where efficiency means runtime. See our guide on brushed versus brushless motors. The usual buyer mistake is spending on a tool and then using cheap blades, which cut slowly and make the tool feel weak.

  2. 02

    Speed range (OPM)

    OPM is oscillations per minute. The Milwaukee 2626-20 runs 11,000 to 18,000 and the RYOBI and Hammerhead go to 20,000. A lower speed suits delicate work and a high speed suits cutting. A speed dial gives control. Think about which accessories you will need: a flush cut blade, a scraper and a sanding pad cover most jobs.

  3. 03

    Vibration and comfort

    Oscillating tools vibrate your hand, and long jobs tire you. Low vibration designs, like the RYOBI, a rubberized grip like the Milwaukee and a dual grip trigger like the DEWALT help. Test the feel if you can. Check how the dust is cleared, since sanding with an oscillating pad creates fine dust that a vacuum adapter helps to control.

  4. 04

    Blade change and compatibility

    A quick blade change saves time and a universal mounting accepts blades from many brands. Check that the tool accepts the accessories you plan to use. A tool free clamp is more convenient than a hex key. Consider the weight of the tool with a battery fitted, as a heavy tool is tiring on overhead cuts.

  5. 05

    Battery platform

    Choose a platform you already own. DEWALT 20V MAX, Milwaukee M18 and RYOBI ONE+ are popular. Several listings here are bare tools, so budget for a battery and charger. See our guide on battery voltage and amp hours. Look at the shape of the nose and the position of the LED, because shadows hide the cut line in tight spots.

  6. 06

    Kit contents

    Accessories matter for a first purchase. The DEWALT DCS356SD1 includes blades, sandpaper and a bag, and the Hammerhead includes a flush cut blade, semicircle blade and sanding pad. A bare tool needs separate accessories. Keep spare blades handy, since a dull blade is the commonest reason people think their tool is underpowered.

Detailed reviews

The 6 best oscillating multi-tools under $100, explained

01
DEWALT 20V MAX XR oscillating tool DCS356D1, brushless, quick blade change, LED, battery and charger
Brushless motor3 speed selectorQuick blade changeBattery included
Check price on Amazon
Best for: Remodellers and DIYers who want a complete, capable kit.

The DCS356D1 is a brushless 20V MAX XR oscillating tool with a three speed selector, a dual grip variable speed trigger, a quick blade change and an LED light. The kit includes a battery and charger, so you can start working right away.

The listing claims brushless motors deliver up to 57 percent more run time than brushed, which is a maker figure under ideal conditions. A speed selector and variable trigger give control for delicate flush cuts and for aggressive plunge cuts. Against the Milwaukee M18 FUEL, it comes with a battery. Against the Ryobi, it costs more and has a stronger platform.

Use the right blade for the material and let the tool cut at its own speed. Keep the blade clamp clean and tight. Owners often say the quick blade change is the feature that changes how they work, because swapping from a cutting blade to a sanding pad takes seconds instead of a search for a key.

What works

  • Brushless motor with a stated run time gain
  • Quick blade change saves time on site
  • Battery and charger included in the kit
  • 3 speed selector and variable trigger give control

Watch out for

  • Higher price tier than corded tools
  • Runtime claims assume ideal use
  • Not ideal for long straight cuts

Specs

Motor
Brushless, up to 57 percent more run time than brushed per the listing
Speed control
3 speed selector and variable trigger
Blade change
Quick change
Kit
Battery and charger included
Best for
Remodelling and trim work
02
DEWALT 20V oscillating tool DCS356SD1 kit with wood blades, sandpaper, tool bag, battery and charger
Brushless3 speed selectorAccessory kitTool bag
Check price on Amazon
Best for: First time buyers who want a complete kit.

The DCS356SD1 is the same style of brushless 20V multi tool as the DCS356D1, supplied with wood cutting blades, sandpaper, a tool bag, a battery and a charger. The accessories turn it into a ready to go kit.

For a beginner, accessories matter, because blades and sandpaper are the first things you need and cost extra otherwise. The tool shares the three speed selector and dual grip trigger of the DCS356D1. Against the DCS356D1, it adds a bag and accessories. Against the Hammerhead, it adds a battery platform.

Store the accessories in the bag and replace blades as they dull. Remove the battery when changing blades. The tool bag is more useful than it sounds, because loose blades are easily lost in a toolbox and a labelled bag keeps them sorted.

What works

  • Includes wood blades, sandpaper and a tool bag
  • Brushless motor with stated run time gain
  • Battery and charger are in the kit
  • Shares 20V MAX batteries with other tools

Watch out for

  • Higher price tier than corded kits
  • Included blades are for wood only
  • Heavier with the battery fitted

Specs

Motor
Brushless, up to 57 percent more run time
Speed control
3 speed selector and dual grip trigger
Included
Wood blades, sandpaper, tool bag, battery and charger
Platform
DEWALT 20V MAX
Best for
First multi tool buyers
03
Milwaukee 2836-20 M18 FUEL brushless oscillating multi tool, tool only
M18 FUELBrushlessAuto load180 degree LED
Check price on Amazon
Best for: Contractors and Milwaukee M18 owners.

The Milwaukee 2836-20 is a brushless M18 FUEL oscillating tool sold as a tool only, with a variable speed dial, an auto load feature that starts slowly for precise cuts and ramps up automatically, and a 180 degree LED light. It is a pro oriented tool.

The auto load feature helps start a cut cleanly without the blade skipping, and the wide LED lights up the work in dark spaces. It is a bare tool, so you need an M18 battery and charger. Against the DEWALT kits, it costs more and targets heavy use. Against the Milwaukee 2626-20, it has a brushless motor.

Use sharp blades and keep the vents clear. Store batteries at partial charge. Contractors say the slow start helps when you begin a flush cut on a painted trim edge, because the blade does not skate along the surface.

What works

  • Brushless FUEL motor for heavy use
  • Auto load slow start helps precise cuts
  • 180 degree LED lights the work
  • Compatible with the M18 battery system

Watch out for

  • Tool only means batteries are extra
  • Upper price tier
  • Less value without M18 batteries

Specs

Platform
Milwaukee M18 FUEL
Motor
Brushless
Feature
Auto load slow start
Light
180 degree span LED
Best for
Contractors and M18 owners
04
Milwaukee 2626-20 M18 orbiting multi tool, 11,000 to 18,000 OPM, 12 speeds, bare tool
12 speed settings11,000 to 18,000 OPMAll metal gear caseM18 platform
Check price on Amazon
Best for: M18 owners who want a rugged, simple multi tool.

The Milwaukee 2626-20 is an older style brushed M18 tool with 12 speed settings from 11,000 to 18,000 orbits per minute and an all metal gear case. A rubberized handle improves grip and the tool comes as a bare unit.

An all metal gear case resists impact damage, which is a durability feature that suits job site use. It uses a brushed motor, so runtime and efficiency are lower than the brushless models. Against the FUEL model, it costs less. If you already own M18 batteries and want a rugged, simple tool, it is a good fit.

Use sharp blades and keep the tool clean. Replace brushes if the motor loses power. If you tend to drop tools on a site, the metal gear case is the sort of feature that keeps a tool alive for years.

What works

  • 12 speed settings give broad control
  • All metal gear case resists impacts
  • Rubberized handle improves grip
  • Lower price tier than the FUEL model

Watch out for

  • Brushed motor is less efficient
  • Tool only means batteries are extra
  • Less refined than newer models

Specs

Speed
11,000 to 18,000 OPM, 12 settings
Gear case
All metal
Grip
Rubberized handle
Platform
Milwaukee M18
Best for
Tough use on a budget for M18 owners
05
RYOBI ONE+ 18V cordless oscillating multi tool, up to 20,000 OPM, tool only
20,000 OPM18V ONE+Variable speed dialLow vibration
Check price on Amazon
Best for: Homeowners who already use the RYOBI ONE+ battery platform.

The RYOBI ONE+ multi tool has a variable speed dial up to 20,000 OPM, a design the listing describes as the lowest vibration in its class and a bare tool format for the ONE+ 18V platform. It targets homeowners and DIYers.

Low vibration reduces fatigue on long sanding or scraping jobs. The listing comparison is a maker claim. A low price and a broad battery platform make it a sensible add for existing ONE+ owners. Against the DEWALT kits, it costs less but needs a battery. Against the Hammerhead, it is cordless.

Use the right accessories for the material. Keep the tool clean. Owners who sand for a long time tend to value low vibration more than peak speed, since fatigue ends the job before the battery does.

What works

  • Variable speed up to 20,000 OPM
  • Low vibration design per the listing
  • Low price tier on a broad platform
  • ONE+ batteries are shared with many tools

Watch out for

  • Tool only means battery is extra
  • Brushed motor in this class
  • Less pro durability

Specs

Speed
Up to 20,000 OPM variable
Platform
RYOBI ONE+ 18V
Vibration
Described as lowest in its class
Kit
Tool only
Best for
Homeowners on the ONE+ platform
06
Hammerhead 2.2 amp corded oscillating multi tool, 20,000 OPM, flush cut blade and accessories
2.2 amp corded20,000 OPMVariable speedAccessory kit
Check price on Amazon
Best for: Workshop use and budget DIY near an outlet.

The Hammerhead is a corded 2.2 amp oscillating tool with a variable speed dial up to 20,000 OPM and a set of accessories that includes a flush cut blade, a semicircle blade and a sanding pad. A corded tool has unlimited runtime and costs far less than a cordless system.

A cord is the tradeoff, as it can catch on the work and limit range. For a workshop or occasional DIY jobs near an outlet, it offers a lot for the price. Against the cordless DEWALT kits, it costs less but lacks freedom. Against the RYOBI, it includes accessories and needs no battery.

Use a rated extension cord and keep the cord away from the blade. Replace accessories as they dull. Because the kit includes a few blades, it is a good way to try an oscillating tool before deciding to commit to a battery platform.

What works

  • Corded power never runs out
  • Variable speed up to 20,000 OPM
  • Accessory kit is included
  • Lowest total cost among the six

Watch out for

  • Cord limits range and can snag
  • Less brand history
  • Vibration is higher than premium tools

Specs

Motor
2.2 amp corded
Speed
Up to 20,000 OPM variable
Included
Flush cut blade, semicircle blade, sanding pad and more
Grip
Ergonomic soft grip
Best for
Workshop and budget DIY

Spec decoder

What the listing measurements really mean

The numbers brands lead with, translated into what they tell you about fit, comfort and wear at home.

OPM

Oscillations per minute, the number of times the blade swings back and forth. A higher number cuts faster.

Watch forThe RYOBI and Hammerhead list up to 20,000, but control matters more than peak speed.

Brushless

A motor without brushes, more efficient and long lived.

Watch forThe DEWALT and Milwaukee FUEL tools use it, but the RYOBI listing does not.

Quick blade change

A clamp that releases the blade without a tool.

Watch forThe DEWALT lists it, but check it grips firmly.

Auto load

A Milwaukee feature that starts slowly and ramps up speed once the blade is in the cut.

Watch forThe 2836-20 has it, which helps precise starts.

Universal fit

A blade mount that accepts accessories from several brands.

Watch forCheck that the tool's mount matches the blades you buy.

Methodology

How We Evaluated These Oscillating Multi-Tools Under $100

Motor and efficiency

We compared brushless and brushed motors and the stated run time gain on the DEWALT. We treated maker claims as best case figures and did not cut with the tools. Owner feedback patterns about vibration, blade clamp wear and battery runtime shaped our scoring.

Speed control

We looked at speed ranges from 11,000 to 20,000 OPM and selectors or dials. Wider control scored higher. We treated stated run time gains as maker claims under ideal conditions.

Comfort and vibration

We weighed grips and vibration claims on the RYOBI and Milwaukee. Lower vibration scored higher. Where a listing was a bare tool we treated the battery as part of the real price.

Kit and platform

We considered included batteries, accessories and platform breadth. Total cost mattered. We compared how many accessories each kit includes and what they are.

Ownership

We reviewed gear case durability, blade clamp wear and owner feedback patterns. Established brands scored higher. Platform breadth was weighed because most buyers add tools over time. Owners of cheaper tools often mention that accessories are the real running cost, which we considered in the value ranking. Safety matters too, so we noted any listing that omitted a mention of blade guards or accessory compatibility.

Decision guide

How to Choose the Right Oscillating Multi-Tools Under $100

By Use

SituationPickWhy
RemodellingDEWALT DCS356D1Brushless and quick change
First multi toolDEWALT DCS356SD1Accessories included
ContractorsMilwaukee 2836-20FUEL and auto load
WorkshopHammerheadCorded and cheap

By Budget

SituationPickWhy
Lowest tierHammerhead cordedAccessories included
Low tierRYOBI ONE+Bare tool
Mid tierMilwaukee 2626-20Rugged and wide speed
Upper tierDEWALT or Milwaukee FUELBrushless

Corded vs Cordless

Corded

The Hammerhead has unlimited runtime and costs less. The cord limits range.

Cordless

The DEWALT, Milwaukee and RYOBI tools give freedom on site. Batteries add cost.

Choose corded for the shop and cordless for remodelling.

By Platform

SituationPickWhy
Own DEWALT 20VDCS356 kitsSame batteries
Own Milwaukee M182836-20 or 2626-20Same batteries
Own RYOBI ONE+RYOBI multi toolSame batteries
No platformHammerheadNo battery needed

For Flush Cutting Specifically

Look for

A flush cut blade, a speed you can control, low vibration and a tool that accepts good blades.

In this comparison

The DEWALT and Milwaukee tools offer good control, and the Hammerhead includes a flush cut blade.

When to Spend More

Spend more if

You use it often or want brushless runtime. The DEWALT or Milwaukee FUEL fit.

Save if

You use it occasionally. The Hammerhead or RYOBI are enough.

Ownership

Maintenance schedule

The upkeep that decides whether a piece still looks good in year five.

TaskIntervalWhy it matters
Replace bladesAs cuts slowA dull blade strains the motor and cuts poorly. Replace when teeth dull. Put a drop of oil on the clamp lever every few months.
Clean the blade clampAfter each useDust and debris jam the clamp. Blow it out. Check the pad for cracks.
Blow dust from ventsMonthlyDust overheats the motor. Use compressed air. Wipe the vents.
Check the gear caseEach seasonCracks and play lead to failure. Replace worn parts. Use a small brush to clear the clamp.
Store batteries coolOff seasonHeat shortens battery life. Store at partial charge. Keep accessories in a labelled bag. Store the accessories in the labelled bag so blades stay sharp and do not rust, which keeps a good kit useful for years.

FAQ

Frequently Asked Questions

What can I do with an oscillating multi tool?

Flush cuts, plunge cuts, sanding in corners, grout removal and scraping. Our guide on oscillating multi tool uses covers many jobs. Many owners say a few quality blades are the best investment, because the right blade makes any tool feel better.

Is brushless worth it?

For a cordless tool, yes, since efficiency stretches runtime. For occasional use, brushed is fine. Hold the tool firmly with both hands for plunge cuts and let the blade reach full speed first.

Will blades fit every brand?

Many tools accept universal blades, but check the mount of your tool. Brand specific mounts exist. Use a low speed for scraping and a higher speed for cutting wood and plastic.

Why does the blade wander?

A dull blade, forcing the tool or a loose clamp. Let the blade do the work at its own speed. Wear eye protection and a dust mask, because the tool throws fine dust and debris.

Corded or cordless?

Corded has unlimited runtime and costs less. Cordless offers freedom and suits remodelling. Clamp the workpiece or hold it firmly, since vibration makes loose pieces move.

Can it cut metal?

Yes, with a bi metal or carbide blade, at slower speed. Check the blade rating for the metal. Tap the blade clamp clean now and then, because dust builds up and makes blade changes harder. Practise on scrap material before cutting a finished surface, since a plunge cut at speed can slip and mark the surface around it.

Bottom line

The short version

Browse more oscillating multi-tools under $100on Amazon →
Brianna Cole, Lead Product Editor

About the author

Brianna Cole

Lead Product Editor, SenseiReview

Brianna Cole leads SenseiReview's buying guides, turning published specifications, documentation and owner feedback patterns into clear verdicts across home, tech, fitness, outdoor and DIY products.

More from Brianna →

Keep reading

Related guides