Amazon affiliate links - we earn a commission.Affiliate disclosure

Buying guide · 12 min read · Updated 2026-11-21

Best Cordless Caulking Guns for Sealants and Adhesives (2026)

Compare six cordless caulking guns by cartridge size, push force, speed control, anti-drip retraction and battery platform, for sealants and adhesives.

Brianna Cole, Lead Product EditorBy Brianna ColeLead Product Editor6 picks comparedSpec-sheet verified
Best Cordless Caulking Guns for Sealants and Adhesives

At a glance

Our top picks

Side by side

Spec comparison

PieceCartridgeControlPrice positionAnti-dripPlatform
Makita XGC01Z 18V LXT 10 oz Caulk and Adhesive Gun, Tool OnlyBest OverallMakita XGC01Z 18V LXT 10 oz Caulk and Adhesive Gun, Tool Only10 ozVariable speed triggerMost expensive of eightn/an/a
DEWALT 20V MAX 10 oz Cordless Caulking Gun with Interchangeable TraysBest Feature BalanceDEWALT 20V MAX 10 oz Cordless Caulking Gun with Interchangeable Trays10 ozVariable speed trigger and spread dialSixth of eightAutomatic plunger retractionn/a
DEWALT 20V MAX 29 oz Cordless Caulking Gun DCE570B, Tool OnlyBest Large CartridgeDEWALT 20V MAX 29 oz Cordless Caulking Gun DCE570B, Tool Only29 ozVariable speed trigger and dialSeventh of eightAutomatic plunger retraction20V MAX, bare tool
Milwaukee 2441-20 M12 10 oz Cordless Caulk and Adhesive Gun, Tool OnlyBest Compact 12VMilwaukee 2441-20 M12 10 oz Cordless Caulk and Adhesive Gun, Tool Only10 ozn/aFifth of eightn/aM12 12V
SPRHUIIG 21V Cordless Caulking Gun Kit with 2 Batteries and 450 Lumen LightBest Complete KitSPRHUIIG 21V Cordless Caulking Gun Kit with 2 Batteries and 450 Lumen Lightn/an/aSecond lowest of eightn/an/a
CRAFTSMAN V20 No-Drip Cordless Caulk Gun CMCE600B, Tool OnlyBest Budget Bare ToolCRAFTSMAN V20 No-Drip Cordless Caulk Gun CMCE600B, Tool Onlyn/an/aCheapest of eightRetracts the plunging rodV20, bare tool

A cordless caulking gun uses a battery-powered motor to push a plunger through a cartridge of caulk, sealant or construction adhesive. It saves your hand from squeezing a trigger for a long bead and gives a steady, even flow, which makes cleaner lines on long runs.

The differences are in push force, speed control, anti-drip retraction, cartridge size and battery platform. This guide compares those, and says plainly which jobs reward an electric gun and which do not.

Before you buy

6 Criteria to Look For Before Buying a Cordless Caulking Gun for Sealants and Adhesives

  1. 01

    Push force and viscosity

    Thick adhesives need strong push, and thin caulk does not. The Makita states 1,100 lb of dispensing force, while other listings give none. A gun that stalls on construction adhesive is a common complaint. Match force to the products you use, and prefer a listed number.

  2. 02

    Cartridge size

    Standard tubes are 10 oz, as on the Makita, Milwaukee and DEWALT 10 oz. Large sausage packs and 29 oz tubes, as on the DEWALT DCE570B, cut reloads on big jobs but are heavy. Check that the gun fits the tubes you use, and choose a size by how long your runs are.

  3. 03

    Speed control and trigger

    A variable speed trigger and a dial let you set a slow flow for corners and a fast one for long runs. The Makita lists a five-speed dial from 0 to 66 IPM, and the SPRHUIIG four speeds. Too fast overruns the bead, and too slow wastes time.

  4. 04

    Anti-drip retraction

    A good gun pulls the plunger back when you release the trigger, so sealant stops flowing. The DEWALT, CRAFTSMAN and SPRHUIIG list this. Without it, you get drips and messy ends. Retraction does not replace a good nozzle cut, so cut the nozzle cleanly.

  5. 05

    Battery platform and what is included

    Bare tools, like the Makita, DEWALT, Milwaukee and CRAFTSMAN, save money if you own batteries. Kits, like the SPRHUIIG, include batteries and a charger. A 2 Ah battery is enough for a house of caulking, but check capacity for heavy use.

  6. 06

    Weight, light and handling

    A caulking gun gets heavier with a full cartridge and a battery. A 450 lumen LED, as on the SPRHUIIG, helps in dark spaces. A rotating cartridge holder, as on the CRAFTSMAN, helps with awkward angles. Check weight if you work overhead.

Detailed reviews

The 6 best cordless caulking guns for sealants and adhesives, explained

01
Makita XGC01Z 18V LXT 10 oz Caulk and Adhesive Gun, Tool Only
18V LXT1,100 lb force0 to 66 IPMTool only
Check price on Amazon
Best for: Pros and serious DIYers who use thick adhesives and already own LXT batteries.

The Makita XGC01Z is a 10 oz 18V LXT caulk and adhesive gun with a motor that the listing says delivers 1,100 lb of dispensing force, a five-speed dial that sets flow from 0 to 66 inches per minute and a variable speed trigger. It is sold as a bare tool.

The tradeoff is price and a missing battery. It is the most expensive of the eight candidates, and you need LXT batteries and a charger. Compared with the DEWALT 10 oz, it states a higher force and a speed range. Compared with the Milwaukee M12, it is on a larger 18V platform with more power.

In ownership, a gun with high force can push thick adhesives, but too much speed overruns a bead. Set the dial for the product, cut the nozzle to size and use the retraction feature to stop drips. Wipe the plunger rod and cartridge holder after use, and clear any cured sealant from the tool.

What works

  • Stated 1,100 lb dispensing force handles high-viscosity adhesives and sealants
  • Five-speed dial from 0 to 66 IPM sets a flow suited to each product
  • Variable speed trigger gives fine control for corners and long beads
  • Shares LXT batteries with the wider Makita 18V tool range

Watch out for

  • Bare tool, so you need LXT batteries and a charger if you do not have them
  • Most expensive of the eight candidates in this comparison

Specs

Cartridge
10 oz
Dispensing force
1,100 lb stated
Speed
5-speed dial, 0 to 66 IPM
Control
Variable speed trigger
Price position
Most expensive of eight
02
DEWALT 20V MAX 10 oz Cordless Caulking Gun with Interchangeable Trays
20V MAX10 ozAnti-dripInterchangeable trays
Check price on Amazon
Best for: DEWALT 20V owners who want a lightweight gun with anti-drip control.

The DEWALT 20V MAX caulking gun takes 10 oz cartridges, with a variable speed trigger, a spread dial to set maximum and minimum flow rates and an anti-drip feature that retracts the plunger rod when you release the trigger. It has interchangeable canister trays and is sold as a bare tool.

The tradeoff is that it is a 10 oz tool, so large jobs mean frequent reloads, and the listing gives no force figure. Compared with the DEWALT 29 oz, it is lighter and cheaper but holds less. Compared with the Makita, it is on a 20V platform shared with many DIY tools.

In ownership, automatic retraction keeps the nozzle from oozing, which saves mess and sealant. Set the spread dial on a scrap bead first, and clean the plunger rod. The interchangeable trays let you switch cartridge types. It suits DEWALT owners who caulk often.

What works

  • Variable speed trigger and spread dial give two levels of flow control
  • Automatic plunger retraction stops drips when you release the trigger
  • Interchangeable canister trays handle different cartridge types
  • Shares 20V MAX batteries with the wider DEWALT tool range

Watch out for

  • Bare tool, so batteries are an extra cost without existing DEWALT tools
  • Listing gives no dispensing force and a 10 oz cartridge needs frequent reloads

Specs

Cartridge
10 oz
Control
Variable speed trigger and spread dial
Anti-drip
Automatic plunger retraction
Trays
Interchangeable canister trays
Price position
Sixth of eight
03
DEWALT 20V MAX 29 oz Cordless Caulking Gun DCE570B, Tool Only
20V MAX29 ozVariable speedAnti-drip
Check price on Amazon
Best for: Construction work with long beads of adhesive or sealant.

The DEWALT DCE570B takes 29 oz cartridges, with a variable speed trigger, a variable speed dial for maximum and minimum flow and an anti-drip feature that retracts the plunger rod. It is a bare tool on the 20V MAX platform.

The tradeoff is size and weight. A 29 oz cartridge is heavier and more awkward overhead than a 10 oz one, and it costs more, seventh of eight. Compared with the DEWALT 10 oz, it holds nearly three times as much, so reloads are rare. Compared with the Makita, it takes a larger cartridge but states no force figure.

In ownership, a big cartridge suits long beads in construction, such as subfloor adhesive and large sealant runs. Keep the cartridge holder clean, set the dial for the material and watch the weight on vertical work. It suits builders who go through many tubes.

What works

  • Twenty-nine ounce cartridge cuts the number of reloads on big jobs
  • Variable speed trigger and dial give fine flow control
  • Automatic retraction prevents oozing after you stop
  • Shares 20V MAX batteries with DEWALT tools

Watch out for

  • Bare tool and seventh of eight in price, near the top of the group
  • Heavier and more awkward than 10 oz guns for overhead or vertical work

Specs

Cartridge
29 oz
Control
Variable speed trigger and dial
Anti-drip
Automatic plunger retraction
Platform
20V MAX, bare tool
Price position
Seventh of eight
04
Milwaukee 2441-20 M12 10 oz Cordless Caulk and Adhesive Gun, Tool Only
M12 12V10 ozCompactTool only
Check price on Amazon
Best for: M12 owners who want a compact tool for tight spaces.

The Milwaukee 2441-20 is a 12V M12 caulk and adhesive gun for 10 oz cartridges, sold as a bare tool. The listing describes it as easy to use, easy to handle and durable.

The tradeoff is detail. The listing in our data gives no force, speed or anti-drip information, so check the manual before you rely on it for thick adhesives. Compared with the Makita at 18V, it is more compact but less powerful. Compared with the DEWALT 10 oz, it uses a smaller battery platform at a similar price tier, fifth of eight.

In ownership, a 12V platform is light and handy for under-sink and tight work. Keep the plunger rod clean, remove the cartridge when finished and store the gun with the plunger retracted. It suits M12 owners who want a small caulk gun.

What works

  • Compact M12 12V body is light and handy for under-sink and tight work
  • Shares batteries with the M12 tool range
  • Takes standard 10 oz cartridges of caulk and adhesive
  • Fifth of eight in price, in the middle of the group

Watch out for

  • Listing in our data gives no force, speed or anti-drip detail
  • 12V power is weaker than the 18V and 20V guns on thick adhesives

Specs

Cartridge
10 oz
Platform
M12 12V
Use
Caulk and adhesive
Design
Compact, easy to handle
Price position
Fifth of eight
05
SPRHUIIG 21V Cordless Caulking Gun Kit with 2 Batteries and 450 Lumen Light
21V kit2 x 2000 mAh4 speeds450 lumen LED
Check price on Amazon
Best for: Homeowners who want a complete low-cost kit with batteries and a light.

The SPRHUIIG is a complete kit with a 21V tool, two 2000 mAh batteries, four adjustable speeds, an automatic retraction mechanism that stops drips and an integrated 450-lumen LED light for dark areas such as under sinks, crawl spaces and attics.

The tradeoff is brand maturity and power. It is a budget brand, and the listing does not give a force figure in our data. Compared with the Makita, it costs far less, second lowest of eight, and includes batteries. Compared with the SEESII kit, it adds an LED light.

In ownership, a kit is simple for a first cordless gun. Charge both batteries before a job, set the speed on a scrap bead and use the light in tight spaces. It suits homeowners who caulk occasionally and want everything in one box.

What works

  • Two 2000 mAh batteries and a charger are included, so it works out of the box
  • Integrated 450-lumen LED lights dark spaces under sinks and in attics
  • Automatic retraction stops drips when you release the trigger
  • Second lowest price among eight candidates

Watch out for

  • Budget brand with no stated dispensing force in the data we had
  • Lower power than the Makita on thick adhesives

Specs

Battery
21V, two 2000 mAh batteries included
Speeds
4 adjustable
Retraction
Automatic when you release
Light
Integrated 450-lumen LED
Price position
Second lowest of eight
06
CRAFTSMAN V20 No-Drip Cordless Caulk Gun CMCE600B, Tool Only
V20Variable speedNo-drip360 degree holder
Check price on Amazon
Best for: CRAFTSMAN V20 owners who want a low-cost caulk gun with anti-drip.

The CRAFTSMAN V20 caulk gun is a bare tool with a variable speed dial that sets maximum and minimum application settings, an anti-drip feature that retracts the plunging rod and a cartridge holder that rotates 360 degrees for the best orientation. It is the cheapest of the eight candidates.

The tradeoff is that it is bare, so you need V20 batteries, and the listing gives no force figure. Compared with the DEWALT 10 oz, it has similar features at a lower price. Compared with the SPRHUIIG kit, it has no batteries or light but is on an established platform.

In ownership, the rotating holder is handy for awkward angles. Keep the cartridge holder clean, set the speed for the sealant and store the gun with the plunger retracted. It suits V20 owners who want a low-cost caulk gun.

What works

  • Cheapest of the eight candidates, which helps if you own V20 batteries
  • Variable speed dial sets minimum and maximum application rates
  • Anti-drip feature retracts the plunging rod when you stop
  • Cartridge holder rotates 360 degrees for awkward angles

Watch out for

  • Bare tool, so you need V20 batteries and a charger
  • Listing in our data gives no force or cartridge size beyond standard

Specs

Platform
V20, bare tool
Speed
Variable speed dial
Anti-drip
Retracts the plunging rod
Holder
Cartridge holder rotates 360 degrees
Price position
Cheapest of eight

Spec decoder

What the listing measurements really mean

The numbers brands lead with, translated into what they tell you about fit, comfort and wear at home.

Dispensing force (lb)

The push force the motor can apply to the plunger. Higher force moves thicker materials.

Watch forThe Makita lists 1,100 lb, and the SEESII lists 300 kg of push force, and many listings give none.

Speed range (IPM)

Inches per minute of plunger travel. A wider range gives more control over bead size.

Watch forThe Makita lists 0 to 66 IPM, and the Uaoaii lists up to 220 mm per minute.

Cartridge capacity (oz)

The size of tube the gun holds. Larger tubes mean fewer reloads but more weight.

Watch forThe Makita, DEWALT 10 oz and Milwaukee use 10 oz tubes, and the DEWALT DCE570B uses 29 oz.

Anti-drip feature

The plunger retracts after you release the trigger to stop sealant flowing out.

Watch forThe DEWALT guns, CRAFTSMAN and SPRHUIIG list automatic retraction.

Battery platform

The voltage and system the tool uses. Sharing batteries across tools saves money.

Watch forThe Makita is 18V LXT, the DEWALT 20V MAX, the Milwaukee M12 and the CRAFTSMAN V20.

Methodology

How We Evaluated These Cordless Caulking Guns for Sealants and Adhesives

Force and speed

We evaluated stated dispensing force and speed range from the published listings. The Makita lists 1,100 lb and 0 to 66 IPM. We did not run any gun.

Control and drip

We compared variable speed triggers, dials and anti-drip features. The DEWALT guns, CRAFTSMAN and SPRHUIIG list automatic retraction.

Cartridge and platform

We looked at cartridge sizes of 10 and 29 oz and battery platforms. The DEWALT DCE570B takes 29 oz tubes.

Ownership and cleanup

We considered cured sealant, plunger rods and batteries from owner feedback patterns. Cleaning the cartridge holder is the main habit.

Claims and value

We treated force and runtime claims as maker figures. We weighed price position against kit contents and platform fit.

Decision guide

How to Choose the Right Cordless Caulking Guns for Sealants and Adhesives

By Material

SituationPickWhy
Thick construction adhesiveMakita XGC01ZStated 1,100 lb force
Long beads on big jobsDEWALT DCE570B29 oz cartridge
General caulk and siliconeDEWALT 10 oz or CRAFTSMANAnti-drip and variable speed
Tight spaces and under sinksSPRHUIIG or Milwaukee M12450 lumen light or compact body

By Budget

SituationPickWhy
Lowest-cost bare toolCRAFTSMAN V20Cheapest of eight
Low-cost kitSPRHUIIGSecond lowest with batteries
Mid-range bare toolsMilwaukee M12 or DEWALT 10 ozFifth and sixth of eight
PremiumDEWALT 29 oz or MakitaSeventh and eighth of eight

Kit vs Bare Tool

Kit

The SPRHUIIG includes two batteries and a charger. It is ready to use, and cost-effective if you own no cordless tools.

Bare tools

The Makita, DEWALT, Milwaukee and CRAFTSMAN save money if you own batteries on the same platform.

Choose a kit if you are starting out, and a bare tool if you already have batteries on the same platform.

By Platform

SituationPickWhy
Own Makita 18V LXTMakita XGC01ZShares LXT batteries
Own DEWALT 20V MAXDEWALT 10 oz or 29 ozShares 20V MAX batteries
Own Milwaukee M12Milwaukee 2441-20Shares M12 batteries
Own CRAFTSMAN V20CRAFTSMAN V20Shares V20 batteries

For Sealants and Adhesives Specifically

Look for

Enough force for your product, anti-drip retraction and variable speed. Cut the nozzle at 45 degrees to the bead size and test on cardboard before the real joint.

In this comparison

The Makita is the strongest for thick adhesives, and the DEWALT 10 oz gives the best feature balance for caulk.

When to Spend More

Spend more if

You use thick adhesives or large cartridges often, want a stated force figure and a pro-grade platform, as with the Makita or DEWALT.

Save if

You caulk a few times a year. The SPRHUIIG kit or a manual gun covers most household jobs.

Ownership

Maintenance schedule

The upkeep that decides whether a piece still looks good in year five.

TaskIntervalWhy it matters
Retract the plunger and remove the cartridgeAfter each jobA pressurized cartridge keeps oozing. Retract the rod, then remove and cap the tube.
Wipe the plunger rod and holderAfter each jobCured sealant jams the rod and holder. A rag with a little solvent keeps them clean.
Check the nozzle cutEvery new tubeA ragged cut gives a messy bead. Cut at a clean 45 degree angle to the bead size you want.
Charge and store batteriesBetween jobsLithium batteries age faster when stored full or empty. Keep them partly charged and cool.
Inspect the trigger and switchEach seasonSealant dust can jam a trigger. Clean around it and replace damaged parts.

FAQ

Frequently Asked Questions

Is a cordless caulking gun worth it?

For long beads and frequent use, yes. It saves your hand and gives an even flow. For a single window or tub, a manual gun is cheaper and gives good control.

How much should I spend on a cordless caulking gun?

Match the tool to your battery platform. A kit suits beginners, and a bare tool suits owners of the platform. Pay more for a stated force and anti-drip.

How long do these guns last?

Motors can last for years, but cured sealant jams rods and triggers. No listing states a rated life, so clean after each job.

Does a 29 oz cartridge matter?

It cuts reloads on big jobs but is heavy. A 10 oz gun is handier for small work and overhead jobs.

Why does my gun drip?

Without retraction, pressure keeps pushing sealant out. Use a gun with anti-drip, retract the plunger after you finish and cut the nozzle cleanly.

Can I use it for construction adhesive?

Only if the gun has enough force. The Makita lists 1,100 lb, but many listings give no figure. Check the manual for thick adhesives.

Bottom line

The short version

Browse more cordless caulking guns for sealants and adhesiveson Amazon →
Brianna Cole, Lead Product Editor

About the author

Brianna Cole

Lead Product Editor, SenseiReview

Brianna Cole leads SenseiReview's buying guides, turning published specifications, documentation and owner feedback patterns into clear verdicts across home, tech, fitness, outdoor and DIY products.

More from Brianna →

Keep reading

Related guides