The DEWALT DCF510B is a 20V MAX XR ratchet with a brushless motor delivering a stated 75 ft-lbs of maximum torque and 0 to 300 RPM, with interchangeable 3/8 and 1/2 inch square drive anvils and a sealed head. The listing says the glass-filled nylon housing helps prevent damage from automotive oils and solvents. It is sold as a bare tool.
The tradeoff is price and bulk. It is the most expensive of the ten candidates, and a 20V ratchet is larger than a 12V one, so it is harder in tight spaces. Compared with the Milwaukee M12, it has twice the stated torque but a bigger head. Compared with the budget 60 ft-lb models, it offers a sealed head and a known platform.
In ownership, a ratchet is for running fasteners, not for final torque. Use a torque wrench for critical bolts, keep the head clean of grease and swap anvils with care. Check the battery platform you own, since the tool is bare.
What works
- Stated 75 ft-lbs of maximum torque is the highest in this group
- Interchangeable 3/8 and 1/2 inch anvils cover most automotive sockets
- Glass-filled nylon housing is described as resisting oils and solvents
- Brushless motor with a 20V MAX XR battery platform shared with DEWALT tools
Watch out for
- Most expensive of the ten candidates, and a bare tool
- Larger head and body than 12V ratchets, so it is tight in cramped engine bays
Specs
- Torque
- 75 ft-lbs maximum
- Speed
- 0 to 300 RPM no-load
- Drive
- Interchangeable 3/8 and 1/2 inch anvils
- Housing
- Glass-filled nylon, resists oils and solvents
- Price position
- Most expensive of ten






