Amazon affiliate links - we earn a commission.Affiliate disclosure
Guide·13 min read

Circular Saw Blade Teeth Explained: Count, Grind, Kerf and Fit

Tooth count versus speed and finish, rip, crosscut and combination blades, ATB, FTG and TCG grinds, kerf, diameter and arbor, materials, and dulling signs.

By Brianna Cole · Updated 2026-11-21

Quick answer

Fewer teeth, around 24, cut fast and rough and suit ripping along the grain. More teeth, 60 or above, cut slowly and leave a smooth edge for plywood and finish work. A combination blade of about 40 teeth is the general compromise. The tooth grind matters too: ATB teeth shear wood fibres cleanly, FTG teeth chisel through rips, and TCG teeth stand up to laminate and non-ferrous metal. Match diameter and arbor hole to the saw, and replace blades that burn or wander.

The blade that comes with a circular saw is usually adequate for rough work and disappointing for anything else. It tears the face of plywood, burns hardwood and wanders on a long rip. Buying a better blade seems like a small expense, but the shelf in the hardware shop offers dozens of blades that differ in ways that are hard to see: the number of teeth, the shape of each tooth, the width of the cut and the metal behind the edge.

This guide explains what each feature does and how to choose, in plain terms. It covers tooth count and its trade off between speed and finish, the difference between rip, crosscut and combination blades, the tooth grinds known as ATB, FTG and TCG, kerf width, blade diameter and arbor size, blades for different materials, and the signs that a blade is dull. It also covers safety, since a wrong blade is a common cause of kickback.

Tooth count: speed versus finish

Each tooth removes a small chip of material as it passes. A blade with few teeth takes a big bite with each tooth, so it cuts quickly and clears sawdust well, but the cut edge is rough because each tooth tears out a larger chip. A blade with many teeth takes small bites, so the cut is slower and smoother, and the edge is cleaner, particularly on the face veneer of plywood.

Typical ranges for a hand held 7 and a quarter inch saw give a feel for the choices. A blade with about 24 teeth is a framing blade, fast and rough, good for construction lumber. A blade with about 40 teeth is a general purpose or combination blade. A blade with 60 or more teeth is a finish blade for plywood, veneered panels and trim, where a clean edge matters more than speed.

More teeth are not always better. A very high tooth count blade in thick, wet or resinous wood can overheat, because the small gullets between the teeth clog with sawdust and the blade drags and burns. The saw also has to work harder. Use the lowest tooth count that gives an acceptable finish, and let a lower count blade do rough work.

Tooth count (7 and a quarter inch)Cutting speedFinishTypical use
About 18 to 24FastRoughFraming, rough ripping of lumber
About 30 to 40ModerateFair to goodGeneral purpose, combination cuts
About 50 to 60SlowerSmoothPlywood, crosscutting boards, trim
70 or moreSlowVery smoothVeneered panels, laminate, fine work

Rip, crosscut and combination blades

Wood fibre runs along the grain. Cutting along the grain, a rip cut, is like splitting a bundle of straws lengthwise: the teeth chisel out strips, and each tooth needs plenty of room to clear them. Cutting across the grain, a crosscut, severs the fibres, and the teeth should slice them cleanly to avoid splintering. The two jobs favour different blades.

A rip blade has fewer teeth, often 24 or fewer, with large gullets and a flat topped tooth that scoops out the material. It cuts fast along the grain and runs cooler, but leaves a rough edge and performs poorly across the grain. A crosscut blade has many teeth, often 60 or more, with teeth ground at an angle to shear fibres and smaller gullets. It leaves a clean edge across the grain but cuts slowly and clogs on long rips.

A combination blade tries to do both, with teeth arranged in groups, typically a set of angled teeth followed by a deeper gullet, to clear chips. It is the practical choice for a household with one saw and one blade, and does neither job perfectly. A framing carpenter may carry a rip style blade, while a finish carpenter uses a high tooth count blade. For a mixed home toolkit, a 40 tooth blade is a good first buy.

A circular saw blade with carbide tips on each tooth lying on a bench
A circular saw blade with carbide tipped teeth, where the number and shape of the teeth decide how it cuts.

Tooth grinds: ATB, FTG and TCG

The shape of the tooth tip is called the grind. The most common is ATB, alternate top bevel. Teeth alternate between left and right slanting bevels at the top, like a row of tiny knives, which slice the wood fibres on each side of the cut. It gives a clean cut on crosscuts and veneered plywood, and is the standard grind for general and finish blades.

FTG, flat top grind, has teeth with a flat, square top, like tiny chisels. They scoop out the cut and are excellent for ripping along the grain, since they clear material efficiently and hold up well. They leave a rougher surface than ATB, so FTG is used on rip blades and some framing blades. It is a tougher, simpler shape that stays sharp longer in hard use.

TCG, triple chip grind, alternates a chamfered tooth with a flat one. The chamfered tooth roughs out the cut and the flat tooth cleans it up, which spreads the wear and resists chipping. It is used for hard, abrasive materials such as laminate, solid surface and non-ferrous metals such as aluminium. A blade that mixes ATB and flat teeth, called ATBR or a combination grind, appears on many general purpose blades.

  • ATB: slicing teeth for clean crosscuts and plywood.
  • FTG: chisel teeth for fast, tough ripping.
  • TCG: alternating chamfer and flat teeth for laminate and non-ferrous metals.
  • Combination grind: groups of ATB teeth with a raker tooth for general use.

Kerf: thin versus full

The kerf is the width of the slot that the blade cuts, determined by the thickness of the carbide tips and the plate behind them. A full kerf blade for a 7 and a quarter inch saw is typically about 1/8 inch, or 3.2 millimetres, and a thin kerf blade about 3/32 inch, or 2.4 millimetres. The exact figures vary by maker.

A thin kerf blade removes less wood, so it needs less power from the saw and cuts faster on a modest motor, and it wastes less material. This matters on a cordless saw, where battery runtime is limited, and when cutting expensive timber. The trade off is that a thin plate is more prone to flex and wander, particularly in thick or wet material and on long rips, and it is more easily damaged if the blade pinches.

A full kerf blade is stiffer and tracks more accurately, which is why it is common on powerful corded saws and table saws. For a battery saw, a thin kerf blade is a sensible choice, as it eases the load, a point that connects to the motor efficiency discussed in brushed versus brushless motors. Whichever you choose, check that the saw's riving knife or splitter is not thicker than the kerf, or the cut will bind.

Blade diameter and arbor

The blade must fit the saw. The diameter is stamped on the saw and often on the blade guard, and common sizes for hand held saws include 5 and a half, 6 and a half, 7 and a quarter and 8 and a quarter inches. A blade of a different diameter than the saw is designed for is a hazard. A larger blade will not clear the guard, and a smaller one reduces the cutting depth and may spin at the wrong speed.

The arbor is the hole in the centre of the blade that fits onto the saw's spindle. Many saws use a 5/8 inch arbor, and some use other sizes or have a diamond shaped knockout in a round hole, which lets the blade fit different spindles. Check that the arbor matches your saw, and never force a blade onto a spindle, or use a makeshift adapter, as the blade can wobble or loosen.

Also check the maximum speed. Every blade is marked with a maximum rpm, and the saw's no load speed must be below it. A blade marked for lower speed than the saw spins is dangerous. The cutting depth depends on the diameter: a 7 and a quarter inch blade cuts about 2 and a half inches at 90 degrees on many saws, enough for nominal two by lumber. Check the manual for the actual figures.

Blades for different materials

For plywood and veneered panels, a high tooth count ATB blade, often 60 or more, reduces tear out on the face veneer. Cutting with the good face down on a hand held saw, since the teeth exit upward on the face, and using a sacrificial board or masking tape on the line helps. A fine blade on a track guided saw gives a very clean edge.

For laminate flooring, laminated panels and melamine, use a blade with a high tooth count and a TCG or similar hard wearing grind, because the abrasive resin in these materials dulls ordinary teeth quickly. For solid hardwood, a combination or crosscut blade with sharp carbide handles the density, and a cleaner blade is needed to avoid burning, since burn marks are common in cherry and maple.

Cutting metal needs a blade designed for it. Non-ferrous metals such as aluminium can be cut with a carbide TCG blade made for the purpose, at the right speed and with lubrication. Steel needs a dedicated metal cutting blade, often with a lower rpm rating, and a saw that suits it. Do not use a wood blade on metal. Do not use a wood blade on masonry either, and never cut anything that you are not sure is safe for the blade.

Hook angle is a specification that experienced users check and boxes rarely explain. It is the forward or backward lean of the tooth face. A positive, aggressive hook pulls the blade into the work and cuts quickly, which suits ripping but raises the risk of grabbing. A low or negative hook cuts more gently and is safer for sliding saws and materials such as aluminium. Hand held saws generally use moderate positive hook, since the operator controls the feed by hand.

Expansion slots, the thin laser cut lines in the blade plate, let the plate expand as it heats without warping, and noise dampening slots reduce ringing. They are a sign of a better made blade rather than a performance claim you must verify. A coating on the plate reduces friction and resin build up, which helps in sappy softwoods, although the coating wears off with use and does not change how the teeth cut.

Signs that a blade is dull or damaged

A dull blade cuts slowly, requires more push, and makes the saw work harder, which may show as a lower pitch sound or slower motor. The cut edge shows burn marks, especially in hardwood and plywood, and tear out increases. The blade may drift from the line or deflect in the cut, which is dangerous and can cause kickback.

Look at the teeth. Rounded, chipped or missing carbide tips mean the blade is finished or needs sharpening. Resin and pitch build up on the teeth and plate and cause friction, burning and a dull feel, and can be removed with a blade cleaner and a soft brush. A blade that is clean and still burns is truly dull.

Check the plate too. A bent, warped or cracked plate makes a blade wobble and cut a wide, ragged kerf, and it can fail violently. Discard any blade with a crack or noticeable warp. Quality carbide blades can often be resharpened a few times by a professional service, which is worthwhile for expensive blades, while cheap blades are usually replaced. See the tools and DIY category for related guides.

Safety, kickback and technique

Kickback is when the blade binds and the saw is thrown back at the operator, and a wrong or dull blade is a common cause. Support the work so that the offcut does not pinch the blade, set the blade depth so that it extends about 6 millimetres, or a quarter inch, below the workpiece, and keep both hands on the saw. Never reach under the work, and never remove the blade guard.

Wear safety glasses and hearing protection, and a dust mask when cutting dust producing materials such as MDF and treated timber. Fine dust from composite boards and some hardwoods is harmful to breathe, and a mask rated for fine dust and an extractor connected to the saw help. Before cutting into walls or floors, check for hidden pipes and cables, as discussed in how to choose a stud finder.

Disconnect the saw or remove the battery before changing a blade, and wear gloves to handle the sharp teeth. Tighten the arbor bolt firmly, noting the thread direction, and check that the blade rotates freely before switching on. If you are injured, apply pressure to bleeding wounds and seek urgent medical help for deep cuts. After cutting, the surface is often finished with abrasives, which are covered in our sandpaper grit guide.

A cordless circular saw with a blade installed resting on a workbench
A circular saw with a blade fitted, where the diameter, arbor and maximum speed must match the saw.

Frequently asked questions

How many teeth should a circular saw blade have?

It depends on the job. About 24 for fast, rough framing and ripping, 40 for general work, and 60 or more for smooth cuts in plywood and trim. A 40 tooth combination blade is a good single choice for a home toolkit.

Is a thin kerf blade better?

It cuts faster on low power saws and wastes less wood, which suits cordless saws. It is less stiff than a full kerf blade, so it may wander in thick or wet material. For a powerful corded saw, a full kerf blade tracks better.

Can I use a wood blade to cut metal?

No. Use a blade made for the metal you are cutting, with a suitable saw and speed, and take proper safety precautions. A wood blade on metal can shatter or kick back dangerously.

Why does my blade burn the wood?

Common causes are a dull blade, resin build up, a feed that is too slow, or a blade with too many teeth for the thickness. Clean the blade, check the sharpness and feed steadily. If burning continues, replace it.

Can I sharpen a circular saw blade myself?

Carbide teeth need diamond tools and care, so most people use a sharpening service. Cheap blades are usually not worth sharpening. Clean pitch build up at home, but leave the grinding to a professional.

What is the difference between ATB and FTG?

ATB teeth are bevelled and slice wood fibres for clean cuts, especially across the grain and in plywood. FTG teeth are flat and chisel out material, which suits ripping and gives a rougher finish.

The bottom line

Match the blade to the work. Use a low tooth count, about 24, for fast rough cuts and ripping, a 40 tooth combination blade for general use, and 60 or more teeth for plywood and trim. Choose an ATB grind for clean crosscuts, FTG for ripping and TCG for laminate and non-ferrous metals.

Check that the diameter, arbor and maximum rpm suit your saw, and choose a thin kerf blade for a cordless saw. Replace or sharpen blades that burn, wander or have chipped teeth, and clean resin from the teeth regularly.

Work safely with the blade depth set correctly, the work supported and the guard in place. A good blade makes a cheap saw cut better, and is the most cost effective upgrade for any circular saw.

Image credits

  • adjdb-fixed-rack.webp: stevepb, Pixabay Content License, source via Pixabay
  • adjdb-spinlock-pair.webp: Arcaion, Pixabay Content License, source via Pixabay
  • adjdb-pair-floor.webp: stevepb, Pixabay Content License, source via Pixabay
  • airfryer-2020-unit.webp: vaxey44972, Pixabay Content License, source via Pixabay
  • airfryer-interior-basket.webp: planet_fox, Pixabay Content License, source via Pixabay
  • airfryer-tabletop-convection.webp: Bagoto, CC BY-SA 4.0, source via Openverse
  • bat-drill-pack.webp: bluebudgie, Pixabay Content License, source via Pixabay
  • bat-ryobi-5ah.webp: Alexei_other, Pixabay Content License, source via Pixabay
  • btcodec-wireless-headphones.webp: vinny1987, Pixabay Content License, source via Pixabay
  • brushless-cordless-drill.webp: dreimarkfuffzig, Pixabay Content License, source via Pixabay
  • brushless-drill-driving-screw.webp: Bru-nO, Pixabay Content License, source via Pixabay
  • sawblade-carbide-teeth-closeup.webp: annawaldl, Pixabay Content License, source via Pixabay
  • sawblade-circular-saw-blade-teeth.webp: jeanvdmeulen, Pixabay Content License, source via Pixabay
  • sawblade-cordless-circular-saw.webp: PfenningMassivholzmoebel, Pixabay Content License, source via Pixabay
  • impact-driver-hex-collet.webp: Mark Hunter, CC BY 2.0, source via Wikimedia Commons
  • foamroller-row-densities.webp: Pexels, Pixabay Content License, source via Pixabay
  • foamroller-thigh-use.webp: Pexels, Pixabay Content License, source via Pixabay
  • foamroller-back-use.webp: Pexels, Pixabay Content License, source via Pixabay
  • hose-coiled-green.webp: Ralphs_Fotos, Pixabay Content License, source via Pixabay
  • hose-nozzle-spray.webp: manfredrichter, Pixabay Content License, source via Pixabay
  • hose-reel-storage.webp: RyanMcGuire, Pixabay Content License, source via Pixabay
  • grillchoice-gas-charcoal-side.webp: pixel2013, Pixabay Content License, source via Pixabay
  • grillchoice-charcoal-kettle.webp: adonyig, Pixabay Content License, source via Pixabay
  • grillchoice-gas-burners.webp: RAMillu, Pixabay Content License, source via Pixabay
  • anc-over-ear-headphones.webp: rupixen, Pixabay Content License, source via Pixabay
  • anc-headphones-over-ear.webp: terydanphiri, Pixabay Content License, source via Pixabay
  • anc-earbuds-case.webp: MUSIC_AND_WALLPAPER, Pixabay Content License, source via Pixabay
  • yogamat-rolled-studio.webp: pixelcreatures, Pixabay Content License, source via Pixabay
  • yogamat-cork-surface.webp: lograstudio, Pixabay Content License, source via Pixabay
  • yogamat-practice-pose.webp: StockSnap, Pixabay Content License, source via Pixabay
  • bits-sds-set.webp: blickpixel, Pixabay Content License, source via Pixabay
  • bits-gold-twist.webp: Life-Of-Pix, Pixabay Content License, source via Pixabay
  • bits-aluminium-oil.webp: blickpixel, Pixabay Content License, source via Pixabay
  • dumbbell-rack-rows.webp: anncapictures, Pixabay Content License, source via Pixabay
  • dumbbell-curl-rack.webp: markusspiske, Pixabay Content License, source via Pixabay
  • dumbbell-hand-grip.webp: Engin_Akyurt, Pixabay Content License, source via Pixabay
  • descale-hamilton-maker.webp: andrew welch, CC0, source via Openverse
  • descale-limescale-pot.webp: MuhamadIksan, Pixabay Content License, source via Pixabay
  • descale-espresso-jimmyweee.webp: 2857440, Pixabay Content License, source via Pixabay
  • castiron-skillet-seasoned-surface.webp: ponce_photography, Pixabay Content License, source via Pixabay
  • castiron-skillet-on-hob.webp: ponce_photography, Pixabay Content License, source via Pixabay
  • shears-bypass-pair.webp: Ray_Shrewsberry, Pixabay Content License, source via Pixabay
  • shears-blade-sharpening.webp: CarlottaSilvestrini, Pixabay Content License, source via Pixabay
  • shears-pruning-cut.webp: schraubgut, Pixabay Content License, source via Pixabay
  • humidifier-cool-mist-unit.webp: asundermeier, Pixabay Content License, source via Pixabay
  • humidifier-ultrasonic-mist.webp: Tiluria, Pixabay Content License, source via Pixabay
  • cooktop-induction-pan.webp: MrWashingt0n, Pixabay Content License, source via Pixabay
  • cooktop-gas-burners-flame.webp: ferarcosn, Pixabay Content License, source via Pixabay
  • mower-rotary-lawn-cut.webp: congerdesign, Pixabay Content License, source via Pixabay
  • mower-cordless-battery.webp: ClickerHappy, Pixabay Content License, source via Pixabay
  • mower-robotic-lawn.webp: MonikaP, Pixabay Content License, source via Pixabay
  • blower-backpack-yard.webp: ClickerHappy, Pixabay Content License, source via Pixabay
  • monitor-gaming-desk.webp: StartupStockPhotos, Pixabay Content License, source via Pixabay
  • monitor-curved-display.webp: PublicDomainPictures, Pixabay Content License, source via Pixabay
  • monitor-dual-screen-setup.webp: StartupStockPhotos, Pixabay Content License, source via Pixabay
  • powerbank-capacity-pair.webp: StockSnap, Pixabay Content License, source via Pixabay
  • powerbank-two-units-cable.webp: aiiapromogifts, Pixabay Content License, source via Pixabay
  • powerbank-phone-charging.webp: aiiapromogifts, Pixabay Content License, source via Pixabay
  • raisedbed-cedar-vegetables.webp: planet_fox, Pixabay Content License, source via Pixabay
  • raisedbed-steel-garden.webp: AndreasGoellner, Pixabay Content License, source via Pixabay
  • raisedbed-brick-stone.webp: Farbsynthese, Pixabay Content License, source via Pixabay
  • bands-loop-set-colours.webp: SpencerWing, Pixabay Content License, source via Pixabay
  • robotvac-suction-floor.webp: HOCKULUS, Pixabay Content License, source via Pixabay
  • robotvac-brush-underside.webp: NickyPe, Pixabay Content License, source via Pixabay
  • robotvac-hard-floor-clean.webp: ed_rsnhr, Pixabay Content License, source via Pixabay
  • smarthome-hub-and-sensors.webp: finnhart, Pixabay Content License, source via Pixabay
  • ssd-and-hdd-side-by-side.webp: bohed, Pixabay Content License, source via Pixabay
  • ssd-sata-2-5-inch.webp: blickpixel, Pixabay Content License, source via Pixabay
  • ssd-hard-disk-interior.webp: wir_sind_klein, Pixabay Content License, source via Pixabay
  • pans-three-materials.webp: Unknown, CC0, source via Openverse
  • treadmill-running-belt.webp: lewisgoodphotos, Pixabay Content License, source via Pixabay
  • treadmill-console-belt.webp: Rattakarn_, Pixabay Content License, source via Pixabay
  • grillgrate-drip-tray.webp: pixel2013, Pixabay Content License, source via Pixabay
  • umbrella-market-patio-table.webp: schaerfsystem, Pixabay Content License, source via Pixabay
  • umbrella-cantilever-offset.webp: ClickerHappy, Pixabay Content License, source via Pixabay
  • umbrella-closed-base.webp: Unknown, CC0, source via Openverse
  • level-cross-line-laser-wall.webp: Billbeee at English Wikipedia, CC BY 2.5, source via Openverse
  • level-bubble-vial.webp: Didgeman, Pixabay Content License, source via Pixabay
  • bench-fid-flat-incline.webp: 12019, Pixabay Content License, source via Pixabay
  • bat-contacts.webp: bluebudgie, Pixabay Content License, source via Pixabay
  • btcodec-phone-and-earbuds.webp: Firmbee, Pixabay Content License, source via Pixabay
  • btcodec-over-ear-wireless.webp: HOerwin56, Pixabay Content License, source via Pixabay
  • brushless-drill-motor-parts.webp: Alexei_other, Pixabay Content License, source via Pixabay
  • impact-driver-and-drill-pair.webp: Bru-nO, Pixabay Content License, source via Pixabay
  • impact-driver-decking-screw.webp: PublicDomainPictures, Pixabay Content License, source via Pixabay
  • bike-spin-saddle.webp: musculacaoMM2020, Pixabay Content License, source via Pixabay
  • grillgrate-cast-iron-clean.webp: pixel2013, Pixabay Content License, source via Pixabay
  • grillgrate-brush-hot.webp: 4666192, Pixabay Content License, source via Pixabay
  • humidifier-evaporative-wick.webp: asundermeier, Pixabay Content License, source via Pixabay
  • iprating-water-droplets-device.webp: AS_Photography, Pixabay Content License, source via Pixabay
  • level-rotary-tripod.webp: jarmoluk, Pixabay Content License, source via Pixabay
  • blower-leaf-pile.webp: ClickerHappy, Pixabay Content License, source via Pixabay
  • massagegun-thigh-use.webp: Surprising_Media, Pixabay Content License, source via Pixabay
  • mesh-wifi-node-on-shelf.webp: jeanvdmeulen, Pixabay Content License, source via Pixabay
  • mesh-wifi-node-pair.webp: dmitrochenkooleg, Pixabay Content License, source via Pixabay
  • mesh-wifi-ceiling-access-point.webp: wishedcn0, Pixabay Content License, source via Pixabay
  • multitool-plunge-cut-wood.webp: neelam279, Pixabay Content License, source via Pixabay
  • multitool-flush-cut.webp: powertools, Pixabay Content License, source via Pixabay
  • multitool-blades-set.webp: jeanvdmeulen, Pixabay Content License, source via Pixabay
  • outdoormat-patio-table-set.webp: KarenJubinville, Pixabay Content License, source via Pixabay
  • outdoormat-teak-bench.webp: rhyslud, Pixabay Content License, source via Pixabay
  • outdoormat-wicker-chairs.webp: 1139623, Pixabay Content License, source via Pixabay
  • bands-tube-handles.webp: SpencerWing, Pixabay Content License, source via Pixabay
  • smarthome-smart-plug-wall.webp: finnhart, Pixabay Content License, source via Pixabay
  • pans-stainless-clad-skillet.webp: ujrzanow194, Pixabay Content License, source via Pixabay
  • pans-cast-iron-skillet.webp: fotoblend, Pixabay Content License, source via Pixabay
  • torquewrench-click-socket.webp: stevepb, Pixabay Content License, source via Pixabay
  • treadmill-motor-hood.webp: FitnessStore112, Pixabay Content License, source via Pixabay
  • usbc-charger-cable.webp: C10Maj, Pixabay Content License, source via Pixabay
  • usbc-wall-charger.webp: viarami, Pixabay Content License, source via Pixabay
  • usbc-cables-connectors.webp: ReadyElements, Pixabay Content License, source via Pixabay

Related Guides